B-12 (Cyanocobalamin) Pro
$44.99
- Synthesized in the USA. Domestic ground and air only, no ocean freight.
- Released only above 99% HPLC purity.
- Its own lot and its own published certificate.
VERIFICATION
Every result against its specification.
How to read this report
B-12 (Cyanocobalamin) Pro, in structural terms.
- Sequence
- Not applicable. Cyanocobalamin is a cobalt corrinoid, not a peptide, and has no amino acid sequence.
- Molecular formula
- C₆₃H₈₈CoN₁₄O₁₄P
- Molecular weight
- Approximately 1355.4 g/mol
- CAS number
- 68-19-9
- Structure type
- Reagent
- Parent sequence
- Not applicable. Cyanocobalamin is a cobalt-containing corrinoid, not a peptide or a fragment of one.
- Primary molecular target
- Cyanocobalamin has no receptor target. In published biochemical work it is studied as a precursor of the cobalamin cofactors used by methionine synthase and methylmalonyl-CoA mutase, as a substrate of the trafficking chaperone CblC, and as a ligand of the binding proteins intrinsic factor, transcobalamin and haptocorrin.
- Physical form
- Lyophilized powder
- PubChem CID
- 165339223
Cyanocobalamin is the cyanide form of vitamin B12. It is built on a corrin ring, a macrocycle of four reduced pyrrole rings, with a cobalt(III) ion at its center. Below the ring, the cobalt is coordinated by a 5,6-dimethylbenzimidazole nucleotide tail; above it, by a cyanide ligand. It is not a peptide. Its formula is C63H88CoN14O14P and its molecular weight is about 1355.4 g/mol.
Where B-12 (Cyanocobalamin) Pro appears in the literature.
- Published studies have used cyanocobalamin in:
- Cobalamin-dependent enzyme catalysis studies
- Cofactor processing and decyanation studies
- Binding kinetics with cobalamin transport proteins
- Reference standard work for cobalamin analysis
- Purified recombinant proteins
- Isolated enzyme preparations
- Cell-free spectroscopic assays
- Analytical reference standard preparations
- UV-visible absorption spectroscopy of cobalamin species
- Stopped-flow and fluorescence binding kinetics
- Enzyme activity assays
- HPLC for purity and identity
- Conversion of cyanocobalamin to other cobalamin forms
- Binding and dissociation rate constants
- Enzyme turnover with cobalamin cofactors
- Chromatographic purity
What has been studied, and in what systems.
Cyanocobalamin is the most widely used form of vitamin B12 in the laboratory, valued for its stability as a crystalline solid.
A review of cobalamin-dependent enzymes describes how the cofactor forms methylcobalamin and adenosylcobalamin support catalysis by methionine synthase and methylmalonyl-CoA mutase (Banerjee and Ragsdale, 2003).
Before cyanocobalamin can serve as a cofactor precursor, its cyanide ligand must be removed. Biochemical work showed that the trafficking chaperone CblC catalyzes this decyanation in vitro (Kim et al., 2008). Separate binding studies compared the kinetics of cobalamin binding to intrinsic factor, transcobalamin and haptocorrin (Fedosov et al., 2002). These studies place cyanocobalamin in cofactor biochemistry and protein-ligand binding research.
These are published research systems. They do not describe approved clinical applications, and they do not establish efficacy or safety in humans.
Banerjee R, Ragsdale SW, 2003. The many faces of vitamin B12: catalysis by cobalamin-dependent enzymes. Annu Rev Biochem. PMID 14527323. https://pubmed.ncbi.nlm.nih.gov/14527323/
Kim J, Gherasim C, Banerjee R, 2008. Decyanation of vitamin B12 by a trafficking chaperone. Proc Natl Acad Sci U S A. PMID 18779575. https://pubmed.ncbi.nlm.nih.gov/18779575/
Fedosov SN, Berglund L, Fedosova NU, Nexo E, 2002. Comparative analysis of cobalamin binding kinetics and ligand protection for intrinsic factor, transcobalamin, and haptocorrin. J Biol Chem. PMID 11788601. https://pubmed.ncbi.nlm.nih.gov/11788601/
About this compound and its batch data.
What is cyanocobalamin?
Cyanocobalamin is the cyanide form of vitamin B12, a cobalt-containing corrinoid. Its formula is C63H88CoN14O14P, its molecular weight is about 1355.4 g/mol and its CAS number is 68-19-9. B-12 (Cyanocobalamin) Pro is supplied as a lyophilized powder in a 10 mg vial. Sold for research use only.
Is B-12 (cyanocobalamin) a peptide?
No. Cyanocobalamin is built on a corrin ring with a central cobalt ion, a nucleotide tail and a cyanide ligand, not a chain of amino acids, so it has no amino acid sequence. It is listed in the Pro Series because each lot is released under its own certificate with the same 99% HPLC purity criterion applied to the rest of the series.
What has cyanocobalamin been examined for in published research?
A review describes how cobalamin cofactors support catalysis by methionine synthase and methylmalonyl-CoA mutase (Banerjee and Ragsdale, 2003, PMID 14527323). The chaperone CblC removes the cyanide ligand in vitro (Kim et al., 2008, PMID 18779575), and binding kinetics with transport proteins have been compared (Fedosov et al., 2002, PMID 11788601). Astramide makes no claim about outcomes in humans.
What purity does the current B-12 Pro lot reach?
Lot PLB-B1210-20260821-01 returned 99% purity by HPLC at 304 nm, reported by pH Solutions Lab on 31 August 2026 (lab sample ID 260827-899-NHS-2). Within the same run, retention time matched a certified reference standard. The lot meets the Pro Series release criterion of at or above 99% HPLC purity. The certificate is published on this page.
How much cyanocobalamin is in the vial?
The label claim is 10 mg per vial, and the certificate lists a target fill of 10.00 mg per vial across 300 vials in the lot. Net content was not separately measured on this certificate, so Astramide does not publish a measured figure for it. Purity and net content are separate measurements.
How should cyanocobalamin be stored for research use?
Lyophilized cyanocobalamin is stored at -20°C and protected from light, because cobalamins are light-sensitive and can convert to other cobalamin forms on exposure. Once reconstituted, the solution is held at 2 to 8°C, protected from light, and used within 14 to 30 days. Repeated temperature cycling and moisture should be avoided.
How is Astramide's B-12 Pro tested?
Lot PLB-B1210-20260821-01 was tested by pH Solutions Lab, an independent ISO/IEC 17025:2017 accredited laboratory (PJLA #84351). The certificate reports purity by HPLC at 304 nm, a qPCR microbial panel of six organisms (none detected) and water activity of 0.33 aw. Net content, endotoxin, sterility and heavy metals are not reported. Results apply only to this lot.
What does Pro Series mean for B-12 (Cyanocobalamin) Pro?
B-12 (Cyanocobalamin) Pro is part of the Astramide Pro Series. It is American-made, synthesized in the USA, and moves by domestic ground and air only, with no ocean freight. It is released under its own lot, and only when HPLC purity measures at or above 99%. The full certificate for each lot is published on this page.
This product is intended strictly for in-vitro laboratory research conducted by qualified professionals. It is not intended for human or animal consumption, clinical use, or therapeutic application. The statements on this page have not been reviewed by the FDA. These research peptides are not intended to diagnose, treat, cure, or prevent any disease. Research Use Only.
Related products
-
Pro SeriesTesamorelin – Pro
$120.00 – $970.00Price range: $120.00 through $970.00Select options This product has multiple variants. The options may be chosen on the product page -
Pro SeriesOxytocin Acetate – Pro
$60.00 – $550.00Price range: $60.00 through $550.00Select options This product has multiple variants. The options may be chosen on the product page -
Pro SeriesKPV – Pro
$44.99 – $400.00Price range: $44.99 through $400.00Select options This product has multiple variants. The options may be chosen on the product page -
Pro SeriesEpithalon – Pro
$44.99 – $400.00Price range: $44.99 through $400.00Select options This product has multiple variants. The options may be chosen on the product page


